inlet and outlet

The precision of the numerical simulation depends on the inlet and outlet boundary conditions as well as the turbulence model more than the grid refinement level and the grid type.

结果表明，相对于网格数目和网格类型，进、出口边界条件和湍流模型对计算和实验结果吻合的影响要大。

The crisscross inlet and outlet make various types of lamp routing possible.

※设有纵横两个方向的进出线口,适合多种布灯方案.

Its better to put letters at the inlet and outlet.

最好在入口和出口处标上字母.

Research on Inlet and Outlet Configurations of Gas-Solids Cocurrent Downflow Reactors

气固并流下行床反应器出入口结构研究现状与展望

Investigation of the inlet and outlet boundary conditions in numerical simulations of twin-screw extruders

双螺杆挤出机流场数值模拟中流道进出口边界条件的探讨

The model of thermal expand valve is built and the connection of flux, pressure difference between the front and behind of the valve and cryogen dryness of inlet and outlet.

建立了热力膨胀阀模型，重点建立了流量与阀前后压差及制冷剂进出口干度的关系。

Provide steam rings for tube side inlet and outlet flanges.

管程的入口与出口法兰配备蒸汽环.

Aim to eliminating above problems, the connection way of three cooling water tanks has chosen the parallel structure compared with series structure, in addition, optimizing the TEG cooling water tank capacity and the cooling liquid inlet and outlet diameter size.

为消除以上问题，将现有的冷端水箱连接方式由串联改为并联，同时在水箱容量、冷却液进出口口径大小两方面进行了水箱的差异化设计。

Owing to the large inlet and outlet angle of blade and short flow passage, the flow field in an impeller of forward-curved multi-blade centrifugal fans was very complex.

前向多叶离心风机广泛应用于空调系统。由于该风机叶片进出口角大、流道短，叶轮内部气体流动非常复杂。

Check the label and the inlet and outlet gauges.

检查商标和入口和出口的量表.

These valves have NPT female inlet and outlet connection and brass body construction.

这些阀门配置NPT内螺纹进口和出口连接,黄铜阀体结构.

The existing problems of shell side structure for domestic current tubular fixed bed reactor are discussed and evaluated. The improvement of shell side structure by adopting outside flow deflector type inlet and outlet structure and adopting baffle rod to support reaction tube are proposed.

探讨和评介了国内现行列管式固定床反应器的壳程结构存在的问题，提出壳程采用外导流筒式进、出口结构和采用折流杆支撑反应管的结构改进措施。

Several inlet and outlet methods and specifications.

进出线口有多种方式及规格.

The chilled water inlet and outlet of chiller is usually 5 ℃ in traditional design.

在楼宇空调水系统设计中,冷水机组的冷水供、回水温差通常为5℃.

Study on Inlet ( Outlet) Layout of Lock Filling and Emptying Culvert

船闸输水廊道进（出）口布置型式的研究

It's better to put letters at the inlet and outlet.

最好在进口和出口处标上字母.

An Improvement on the Inlet and Outlet Valves of High Pressure Diaphragm Pump

高压隔膜泵进出料阀的改进

Pumps are vertical, single-level, single-use type , level inlet and outlet type.

1泵为立式 、 单级 、 单吸式 、 水平进水及水平出水.

There are much difference from traditional form of radial piston pumps in design, which are: There are two inlet and two outlet ways to achieve to being double acting piston radial pump;

此泵与传统形式的径向柱塞泵相比有很多不同的地方：配流轴采用两个吸、排油窗口，以实现双作用径向柱塞泵的构想；

The 3-D transient internal fluid of the exhaust manifold has been simulated with the inlet and outlet boundary conditions calculated by the thermodynamics.

通过热力学计算得到排气歧管的入口和出口边界条件，计算排气歧管的三维瞬态内流场；

Shape, size, site, color, and inlet and outlet slope of page next o page.

页连接符号的形状 、 大小 、 位置 、 颜色 、 进出箭头.

Its reactor has nozzles on side wall and material inlet and outlet.

反应器的两侧壁上装有喷嘴,上、下分别设有进料口和出料口.

Close valves at both inlet and outlet ends.

进、出水端阀门关上.

It'should be included the inlet and outlet dimension for the max overall dim.

计算最大外形尺寸时,需加上进出线口尺寸.

Multi-material inlet and outlet can be set to meet the requirement of transportation.

可设置多个进出料口,满足物料输送的要求.

Connecting stage. Inlets and outlets can be moved. Inlet and outlet quantities can be specified.

连接阶段. 可移动输入口和输出口.可指定输入口和输出口数量.

For convenient assembling, a connection short pipe and connection flange are positioned at the inlet and outlet.

为了便于装配，在进、出口处均设有连接短管及连接法兰。

Presents the field test data around a year of a groundwater source heat pump with pumping and recharging in the same well ( GSHPPRSW) project in Beijing, including the inlet and outlet groundwater temperature, groundwater flow rate and temperature of observation wells.

给出了北京某同井回灌地下水地源热泵工程近一年的现场试验数据，包括进出口水温、地下水流量、测井温度。

Impeller or both water inlet and outlet pipelines blocked up.

叶轮或进出水管路阻塞.

The temperature regulating valves designed for 300 MW units by the institute are mostly placed at the outlet piping of the cooler and a fewer placed at the inlet piping of the cooler.

西北电力设计院所设计的300MW机组，将温度调节阀多数设置在设备冷却器的出口管路上，少数设置在设备冷却器的进口管路上。